Rugby: scrum 2v1

Groups of 3. - 1 player is active, 2 players are resisiting. - Active player gets into scrumage position between 2 defending players. - Tries to push both players back, like a scrum.

Groups of 3. - 1 player is active, 2 players are resisiting. - Active player gets into scrumage position between 2 defending players.- Tries to push both players back, like a scrum.

Groups of 3. - 2 players get into a strong T.O.P position.- Another player starts to to standing press ups on to the heads of the 2 players. - This encoruages neck and core strenth essential for a safe scrum.

This is a simple 2 v 1. The two players have to get past the one defender without being touched, that's it. The defender will start 10 meters back, and can move anywhere inside the box. The attack must remain inside the box and all pass msut be legal. Don't forget to change the defender.

The aim of the drill is to develop mechanisms to unlock defences in open playThe first defender/feeder starts with the ball at a cone set up on the touch line five metres out from the try lineSet another 2 cones 15 meters up on the same touch line. Two players (defenders of the 3v2) start from here once the 2v1 is completed.Set 2 cones on the try line 5 metres apart to create the start position for the two attackers and the attacking channel for the 2v1The ball is fed from the first defender, with the attackers completing a 2v1The defender joins the two attackers to create a 3v2Two attackers then become the two defenders for the next repetition of the drill

• The aim of the drill is to develop handling in a short space.

Drill to improve short space and wide space overlap play.Set up a grid 15m wide, split into a 5m channel and a 10m channel, and 10m long (see diagram).4 attackers (red) line up along one side, A1 and A2 within the 5m channel opposite D1(blue). A3 and A4 line up in the 10m channel opposite D2 and D3.A1 and A2 run a 2v1 against D1 in the 5m channel. When A2 receives the ball they run out of the 5m channel into the 10m channel and into a 3v2 situation linking with A3 and A4 attacking D2 and D3.D2 and D3 can't move until A2 enters the 10m channel, and to start with can only move laterally along the try line.DISCUSSION:If players are struggling to execute the 3 v 2 situation, widen the 10m channel to 15m and once they have success at this width bring the channel back to 10m wide.PROGRESSION:D2 and D3 can move off the line to put pressure on the attack once A2 enters the 10m channel.

Keep your player briefing, brief - and get the players moving as quickly as you can. You may consider having a demo group. On your go: The player acting as the Scrum Half passes a ball to the grid on his right and then another ball to the grid on his left, both passes will be from the ground. Upon receiving the pass - each grid begins their 2 v 1 attack and the player with the tackle pad presses up in defence. When the player acting as the scrum half has completed their two passes, they join the attackers on either the left or right grid. The first receiver of each attack becomes a Scrum Half - or simply returns to the start of the grid to join a new attack as the first receiver. Players rotate positions e.g. Scrum Half, First Receiver, Second Receiver. Defenders can move forward and back, and side to side. Change the defenders often to give them a chance in attack.

The drill starts with two teams of equal players playing a standard game of touch. Whenever a touch is made, the defender immediately joins the attacking side and acts as scrum half. This creates an attacking overload. Players must try to score a try by exploiting the overload in the least amount of touches. The drill resets after a try is scored.

Drill to practice overlap situations.Set up a grid roughly 10m x 10m, with another grid roughly 5m x 5m adjacent to it (see diagram - red cones and green cones).In the bigger grid have two defenders (red) and in the smaller grid have one defender (red).Three attackers (blue) attack the 2 defenders in the first grid. Once they have completed the 3 v 2 situation the player with the ball and one other support player run around the cone and attack the one defender in the smaller grid.Swap the attack and defence after 3-5 repetitions. PROGRESSION:The ball starts on the opposite side to practice passing in both directions.A coach/other player feeds the ball to the three attackers so the drill can start in any position. The coach/other player can kick or roll the ball to the attack to start the drill.

One attacking team and one defending team.Exercise focused on decision making when in a 2 v 1 situation.Each team lines up either side of the coachOn 'GO' two attackers run round one side of the playing area and one defender runs round the other side. The coach passes to one of the attackers to initiate play.The aim is for the one attacker to reach the end line of the defender's side without being tackled/intercepted by the defender.

Groups of 6 Balls 2 attackers start with the ball the complete a simple 2v1 catch and pass. The first defender then has to scramble his way back to prevent the defenders scoring the 2nd 2v1 situation, from another defender a few meters behind.

This is a basic 2 v 2 drill to allow players to progress from a simple 2 v 1. In a channel no wider than 10m, 2 attackers have 5 attempts to score a try on the red cones. The attackers try to create space and beat the defenders by running good support and holding lines.

Split your players into two teams in an approx 20mx15m for 12 players. Change this according to numbers.Give every play a ball, they have to hold this in one hand the entire time whilst moving about the gridWork as a team to complete as many passes as possible without dropping the ballCatch and pass the ball in one hand without using the chest as support

This is a quick drill to prime your players in your defence organisation on the short side and its an opportunity to ingrain you defence principlesThe aim of the drill is to develop your teams good habits in defending the short side whilst changing the attack picture continuouslyAfter each set, player resetSet 4 cones up in a square 1m apart 15m from the touch line, this will mark the break downDefending players line up on the far side of the ‘ruck’ and these players will be players who will ‘fold’ on the coaches call3 or 4 players will act as attacking players2 other defending players are positioned 5 meters back from the gain line and on the touch line.These players need to connect with the players folding around the ruck

<span style=&quot;background-color: transparent;&quot;>Set a cone 2 meters from the defensive line. This will mark where the ball will passed from (feed) preferably from a scrum half.<span style=&quot;background-color: transparent;&quot;>Set a cone 0.5 meters each side from the mid point of the passing cone to simulate the sides of the ruck.<span style=&quot;background-color: transparent;&quot;>Set a cone a cone 5 meters from the ruck on the defensive line. 4 players start as attackers3 defenders start on their stomaches on the other side of the defensive cone (ruck) and 1 player on the defensive cone 5 metres from the ruck<span style=&quot;background-color: transparent;&quot;>The player on the 5 meter cone (defence) starts the drill by shouting ‘FOLD’ (or whatever call your team may use).<span style=&quot;background-color: transparent;&quot;>Defenders on their stomachs get up and fold around the ruck to take up a defence position. Players fold wide first, and ensure that 2 players are close to the ruck (Guard and Body Guard). <span style=&quot;background-color: transparent;&quot;>The player on the defensive cone bounces out (takes space in the defence line), the first player who folds takes up a position on the 5 meter defence cone (or inside the first attacking player)<span style=&quot;background-color: transparent;&quot;>Once the defence line is set the scrum half can pass the ball.<span style=&quot;background-color: transparent;&quot;>The attackers work to beat the defence, setting up a 'tip' (running a hard line) and 'pull back' option. They should read the defensive movements and make a decision to hit the tip option or pull out the back<br><br>

2 Teams Ball Bibs Tackle touch is a contact game that focuses on technique rather than the power of the contact. The game is a normal game of touch, however when a touch is made, both ball carrier and defender put their chests to the floor. They then bounce back up, for the defender to make a low chop tackle. This takes out alot of the power of the colision and means the defender can focus more on technique.

Running straight and changing your running line will make players better attackers and underpins an effective 2 v 1Start with a 5 v 3 situation, all five attackers start in a slightly angled line with the end player with ball in handOn Go, the play starts and the first pass is made. The receiving player runs a straight line toward the opposing player and 'fixes them up', meaning the defender is square on and must make the decision to either tackle or anticipate the pass

<span style=&quot;color: var(--color); font-style: inherit; font-variant-ligatures: inherit; font-variant-caps: inherit; font-weight: inherit;&quot;>Set up a large square with a cone in each corner. Three attacking players start along one side of the square with two defenders in the middle. You can increase the number of attackers or defenders as you wish. Attacker always try to attack across the square. Once the attackers reach the other side of the square they pop the ball to the attackers on the side of the square and not in front of them.<br>

<span style=&quot;background-color: transparent;&quot;>Set up: the cones as shown with a cone 10 meters each side of the posts on the try line. This will mark where the ball will be passed from (feeder) preferably from a scrum half.<span style=&quot;background-color: transparent;&quot;>Divide the group into 3 and ask them to stand in single file behind each cone.<span style=&quot;background-color: transparent;&quot;>The ball is fed from a position alternately from either side of the post. This will encourage the players to scan, communicate and to be expectant of the ball.<span style=&quot;background-color: transparent;&quot;>The players on the cones opposite the posts will either be the 1st receiver or the BANG option runner. The BANG runner is always running an out to in, or up to in line to fix the 2nd defender.<span style=&quot;background-color: transparent;&quot;>The players on the middle cone will receive the ball in the BINGO (pull back) option outside the ‘outside’ post or just in behind the BANG player.<span style=&quot;background-color: transparent;&quot;>The BINGO players should run and an arced run to receive the ball outside the outer post. The BINGO player should try to straighten up prior to receiving or on receiving the ball.<br>Progression:<span style=&quot;background-color: transparent;&quot;>Get 2 players or coaches to stand in front of the posts with 2 different coloured cones in their hands on their hips.<span style=&quot;background-color: transparent;&quot;>The cones will represent the ‘hips’ of the 2nd defender.<span style=&quot;background-color: transparent;&quot;>The aim is to encourage the 1st receiver to scan, look, and make a quick decision (choice of pass) depending on what the defender is doing.<span style=&quot;background-color: transparent;&quot;>If the 1st receivers sees the ‘inside’ cone on the 2nd defender then they must assume the defenders hips are turned OUT and make a short pass to the BANG runner.<span style=&quot;background-color: transparent;&quot;>If the 1st receivers sees the ‘outside’ cone on the 2nd defender then they must assume the defenders hips are turned IN and make a PULL BACK pass to the BINGO runner.

The scrum half starts with the ball. They pass to the first red player who then passes to the second red player who then passes to red player three into the free space To start with red defenders must only defend against red 1 and 2.

This is a basic 2 vs 2 drill to allow players to progress from a simple 2 v 1. In a channel no wider than 10m, 2 attackers have 5 attempts to score a try on the red cones. The attackers try to create space and beat the defenders by running good support and holding lines.

Set up: Set up the cones as shown with a cone 10 meters each side of the posts on the try line. This will mark where the ball will be passed from (feeder) preferably from a scrum half.<span style=&quot;background-color: transparent;&quot;>Divide the group into 4 and ask them to stand in single file behind each cone, 3 attacking groups, 1 defending group.<span style=&quot;background-color: transparent;&quot;>The ball is fed from a position on the try line (10 meters from the post). <span style=&quot;background-color: transparent;&quot;>The players on the staggered cones opposite the posts will catch and pass the ball using the correct technique.<span style=&quot;background-color: transparent;&quot;>The player on the defending cone will move forward once the scrum half passes the ball to apply pressure on the middle attacking player.<span style=&quot;background-color: transparent;&quot;>The players on the middle cone will receive the ball with a live defender in front of them.<span style=&quot;background-color: transparent;&quot;>The 3rd receiving player needs to receive the ball at pace and run as close to the outside post as possible.

<span style=&quot;background-color: transparent;&quot;>Set up a 8 channels of cones 5 metres apart<span style=&quot;background-color: transparent;&quot;>A group of 4 players start on the side line, and all players need to work around the nearest/corner cone.<span style=&quot;background-color: transparent;&quot;>The first player with the ball will run into the nearest channel of cones (lane 1) and all the other players will work around the corner cone and filter into the proceeding channels<span style=&quot;background-color: transparent;&quot;>The 1st player passes the ball as soon as the 2nd player gets into the 2nd channel. The ball is passed down the line of 4 players until the 4th players receives the ball.<span style=&quot;background-color: transparent;&quot;>Once the 4th player receives the ball, the ball is placed down and all the players work around to get into their respective channel to repeat the process.<br>

Drill to practice 3 v 2 attacking scenarios.Set up a channel 20m long and 15m wide with cones every 10m along the length (red, yellow, green).Set up 5 lines of players between the first two cones, the two players on each end are the defenders (red), and the three in the middle are attackers (blue).The ball starts with one of the defenders on one side and that player runs forward and throws a long pass to the defender at the other end of line. He then continues his run around the far (green) cone to defend.The defender who has caught the ball puts it down on the middle (yellow) cone and continues his run around the far (green) cone to defend.Once the second defender has put the ball down on the yellow cone the attackers may begin their attack. The player nearest the cone runs to pick up the ball and then they attack the two defenders, trying to score over the line marked by the green cones. PROGRESSION:Start from the opposite side to practice passing in both directions.Reduce the width of the channel to make it harder for the attackers to scoreAdd a defender to come round late and create a 2 v 1 after the 3 v 2

Tell your players to do the following....... The two passing players keep passing the ball until the coach shouts GO. On GO, the player holding the ball is an attacker, the other two attackers will go with that players. The remaining passer becomes a defender, and will join the defence with the two defenders at the bottom of the grid. On GO - the attack begins, and the defence should try and stop them. The attack aims to score a try at the bottom of the grid. Following each attack the players should return to their positions, but should swap around. You might decide to start this as a touch exercise, then go to contact.